Endevco
 
  • Reset
2017 | Ireland

Experimental investigation, numerical modelling and multi-objective optimisation of composite wind turbine blades

2017 | Italy

Smartphone accelerometers for the detection of heart rate

2017 | Brazil

Damage detection assessment in reinforced concrete slabs using impact tests

2017 | USA

Chip Scale, Ultra Sensitive Opto Mechanical Acceleration and Force Sensors

2017 | USA

Replicating Real-World Friction of Motorcycle Helmet Impacts and Its Effects on Head Injury Metrics

2017 | Sweden

Demonstration of an improved passive acoustic fault detection method on recordings from the Ph?nix steam generator operating at full power

2017 | UK

Utilising an advanced technology of people tracking in vibration serviceability application

2017 | UK

Design and construction of a reconfigurable pedestrian structure

2017 | UK

Investigation of transmission of pedestrian-induced vibration into a vibration-sensitive experimental facility

2017 | Singapore

Assessment of the dynamic characteristics of the Helix bridge at Marina Bay, Singapore

2017 | USA

A System for Highly Resolved Measurements of the Interaction of 3D Unsteady Flows with Aerodynamic Surfaces

2018 | USA

Pipe Overpack Container Fire Testing: Phase II-A.

2018 | USA

An Indicated Loss Analysis of a Light-Commercial Spool Compressor using High-Speed Pressure Measurements

2017 | USA

Investigation of Brass Tubes as Energy Damper in the Underbody Blast Environment

2017 | TBD

Acceleration Sensing Technologies for Severe Mechanical Shock

2017 | China

Error Correction of Measured Unstructured Road Profiles Based on Accelerometer and Gyroscope Data

2017 | Russia

Investigation of flows induced by subsonic turbulent jets and their relation with the effect of static pressure reduction in a jet

2017 | India

Final Phase Flight Performance and Touchdown Time Assessment of TDV in RLV-TD HEX-01 Mission

2017 | USA

The Effect of Ambient Pressure on Blast Reflected Impulse and Overpressure

2017 | France

Design of air blast pressure sensors based on miniature silicon membrane and piezoresistive gauges

2017 | USA

The Effect of Turning Angle on the Loss Generation of LP Turbines

PCB PIEZOTRONICS


PCB® manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load, and shock in research and development as well as industrial applications.

ENDEVCO


The Endevco® brand is known for highly reliable products for test and measurement applications, including solutions for shock, vibration, motion, pressure, and supportive instrumentation. It was acquired by PCB® in 2019.

CONNECT

CONTACT


10869 NC Highway 903
Halifax, NC 27839

SensorlineSM
+1 716-684-0001

1-866-ENDEVCO

Endevco® is a registered trademark of PCB Piezotronics of North Carolina, Inc.

© PCB Piezotronics of North Carolina, Inc. All rights reserved