Endevco
 
  • Reset
2014 | USA

Exploration of MEMS G-Switches at 100-10,000 G-Levels with Redundancy

2014 | China

Analysis and design for piezoresistive accelerometer geometry considering sensitivity, resonant frequency and cross-axis sensitivity

2014 | TBD

Slowed rotor wind tunnel testing of an instrumented rotor at high advance ratio

2014 | France

Chatter in interrupted turning with geometrical defects: an industrial case study

2014 | TBD

Characterizing brain mechanics during a two-phase response to dynamic overpressure loading

2014 | TBD

An Experimental Study of Pressure Distribution on the Inner Surface of a Parabolic Nozzle in Laser Propulsion.

2014 | USA

Complex Geometry Effects on Open Cavity Dynamics

2014 | Germany

High-speed tomographic piv measurements of buffet flow over a supercritical airfoil

2014 | TBD

Characterization of Force Deflection Properties for Vehicular Bumper-to-Bumper Interactions

2014 | USA

FRACTURED BONES

2014 | USA

Combustion stability characteristics of the project morpheus liquid oxygen/liquid methane main engine

2014 | Switzerland

Tape drive track following using cascade control

2014 | Brazil

PROPOSTA DE DESENVOLVIMENTO DE UM SISTEMA DE DIAGNîSTICO PARA DETEC?ÌO DE BARRAS ROMPIDAS, EM MOTORES DE INDU?ÌO COMÊÉ

2014 | South Korea

Investigation of the effects of different types of interlayers on floor impact sound insulation in box-frame reinforced concrete structures

2014 | Australia

Effect of modulation on perceived annoyance of floor impact noise

2014 | TBD

Modelling the dynamics of the piano action: is apparent success real?

2014 | South Korea

Identification of structural defects in rail fastening systems using flexural wave propagation

2014 | UK

Enhanced ground-based vibration testing for aerodynamic environments

2014 | TBD

Mitigation of tip vortex cavitation by means of air injection on a Kaplan turbine scale model

2014 | USA

Detailed Test Report for the Static Acceleration Testing of a cRIO Data Acquisition System

2014 | USA

Bending fatigue life comparison between DMLS and cold-rolled nickel alloy 718

PCB PIEZOTRONICS


PCB® manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load, and shock in research and development as well as industrial applications.

ENDEVCO


The Endevco® brand is known for highly reliable products for test and measurement applications, including solutions for shock, vibration, motion, pressure, and supportive instrumentation. It was acquired by PCB® in 2019.

CONNECT

CONTACT


10869 NC Highway 903
Halifax, NC 27839

SensorlineSM
+1 716-684-0001

1-866-ENDEVCO

Endevco® is a registered trademark of PCB Piezotronics of North Carolina, Inc.

© PCB Piezotronics of North Carolina, Inc. All rights reserved