Endevco
 
  • Reset
2015 | USA

A short review of microwave and laser discharges for supersonic flow control

2015 | USA

Freestream effects on boundary layer disturbances for HIFiRE-5

2015 | USA

Freestream Effects on Boundary Layer Disturbances for HIFiRE-5 (Postprint)

2015 | Austria

Do current guidelines on vibration sufficient health protection at the community level independent of the accompanying soundscape?

2015 | USA

An examination of an adapter method for measuring the vibration transmitted to the human arms

2015 | USA

Reference-free displacements for condition assessment of timber railroad bridges

2015 | India

Fluid damping in rectangular tank fitted with various internal objectsÐAn experimental investigation

2014 | Netherlands

Parametric amplification of nonlinear beam vibrations

2014 | TBD

Boundary condition identification of a plate on elastic support

2014 | China

Blind Source Separation Research Based on the Feature Distance Using Evolutionary Algorithms

2014 | USA

Large-scale experimental evaluation and numerical simulation of a system of nonlinear energy sinks for seismic mitigation

2014 | UK

Instantaneous pressure measurements on a spherical grain under threshold flow conditions

2014 | TBD

A study of the strain gauge and accelerometer based on giant stress-impedance (GSI) effect of CoFeSiB amorphous microwire

2014 | TBD

Experimental Study of Torsion of Guyed Mast Shaft.

2014 | TBD

Experimental Study of Torsion of Guyed Mast Shaft

2014 | France

Identification and vibration attenuation for the parallel robot Par2

2014 | TBD

A proposal to minimize the dispersion on primary calibration results of single-ended accelerometers at high frequencies

2014 | Iran

Application of vibration response technique for the firmness evaluation of pear fruit during storage

2014 | Canada

Implementation of an active vibration damping system for the SOFIA telescope assembly

2014 | USA

Kinematics of pediatric crash dummies seated on vehicle seats with realistic belt geometry

2014 | USA

Exploration of MEMS G-Switches at 100-10,000 G-Levels with Redundancy

PCB PIEZOTRONICS


PCB® manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load, and shock in research and development as well as industrial applications.

ENDEVCO


The Endevco® brand is known for highly reliable products for test and measurement applications, including solutions for shock, vibration, motion, pressure, and supportive instrumentation. It was acquired by PCB® in 2019.

CONNECT

CONTACT


10869 NC Highway 903
Halifax, NC 27839

SensorlineSM
+1 716-684-0001

1-866-ENDEVCO

Endevco® is a registered trademark of PCB Piezotronics of North Carolina, Inc.

© PCB Piezotronics of North Carolina, Inc. All rights reserved