Whether measuring mode shapes of disk drive components, skin surface pressures of an experimental aircraft, shock testing to improve product durability or the vibration level of a new hybrid energy system, we offer the most comprehensive and reliable line of transducers, cables, electronics and accessories.
|TYPICAL APPLICATIONS||REPRESENTATIVE MODELS|
|HALT/HASS||7251A, 41A, 2224C|
|Wind tunnel||8507C, 8515C|
|Drop testing||727, 22, 23, 136|
|Environmental shock and vibration testing||7201, 7253D, 7240C|
|Modal analysis||F4/F7, 43A, 45A, 133|
|Sports equipment testing||7264B, 35B|
|Test verification setup||4830B, REF2520R|
Highly Accelerated Life Test (HALT) and Highly Accelerated Stress Screening (HASS) use stress testing methodologies to find defaults prior to products being released in order to prevent costly repairs in the field.
The Model 7251A is a real “workhorse”. It is a small piezoelectric accelerometer with integral electronics that is hermetically sealed against environmental contamination, offers high output sensitivity, and wide bandwidth.
The 41A family has many TEDs capable accelerometers with a variety of configurations that make it compatible with a wide range of applications. For those budget stressed projects, take a look at the small but rugged 2224C.
Wind tunnels can be classified by air flow speed (subsonic, transonic, supersonic, hypersonic) or shape (open or closed). The key to reliable pressure measurements in all tunnels is using a pressure transducer that does not interfere with the air flow and has a high frequency response.
The miniature, low profile, pancake-shaped 8515C pressure sensor can be adhesively mounted on curved surfaces with minimal effect on laminar air or hot gas flow.
Where the application requires a cylindrical package, the miniature 8507C can be deployed. Both of these sensors feature an active four-arm strain gage bridge diffused into a sculptured silicon diaphragm.
Self-contained hybrid temperature compensation provides stable performance over a wide temperature range of 0°F to 200°F (-18°C to +93°C). Each unit has excellent linearity to 3X their respective ranges.
A wide variety of Endevco accelerometers have been used for obtaining dynamic equipment measurements in group and individual sports.
Common to all sports accelerometer applications is the need for small size in a rugged package that can withstand high shocks. The 35B is another good example. This sensor is the world’s smallest triaxial IEPE accelerometer (0.235 inch cube) and withstands shocks to 5000 g’s.