Endevco
 
  • Reset
2016 | USA

Development of a loss pareto for a rotating spool compressor using high-speed pressure measurements and friction analysis

2016 | USA

An internally pressurized aerostatic journal bearing for thermoacoustic engines

2016 | USA

Baseline characterization of the 30kW miniature arc jet facility mARC at NASA Ames

2016 | USA

Characterizing the transient growth mechanism on a hypersonic blunt body at a high angle of attack

2016 | Belgium

Proof of Concept of Crack Localization Using Negative Pressure Waves in Closed Tubes for Later Application in Effective SHM System for Additive ManufacturedÊÉ

2016 | Italy

Proof of concept of the structural health monitoring of framed structures by a novel combined experimental and theoretical approach

2016 | TBD

Broadband measuring system for unsteady flow investigation in wind tunnel

2016 | Germany

Analysis of increased annoyance reactions after the introduction of new tramways, based on psychoacoustic parameters

2016 | Austria

Analysis of psychoacoustic and vibration-related parameters to track the reasons for health complaints after the introduction of new tramways

2016 | USA

Validation and Repeatability Testing of a New Hybrid III 6-year-old Lower Extremity

2015 | Spain

Electronic wireless drum sticks

2015 | China

Study on board-level drop impact reliability of SnÐAgÐCu solder joint by considering strain rate dependent properties of solder

2015 | TBD

Design, simulation and fabrication of triaxial mems high shock accelerometer

2015 | Czech Republic

Theoretical and experimental study of coupled rocking-swivelling model of guyed mast shaft

2015 | Brazil

Utiliza?o de dispositivo m?vel na mensura?o da Vibra?o de Corpo Inteiro (VCI)

2015 | USA

Experimental study of constant volume sulfur dust explosions

2015 | TBD

Prediction of Flow-Induced Vibration of Vehicle Side-View Mirrors by CFD Simulation

2015 | Israel

Convective heat transfer investigation of acoustically excited flow over an isolated rib obstacle

2015 | Israel

Heat Transfer Implications of Acoustic Resonances in HP Turbine Blade Internal Cooling Channels

2015 | TBD

Influence of the flow rate ratio in a jet pump on the size of air bubbles

2015 | Netherlands

Influence of mouthpiece geometry on saxophone playing

PCB PIEZOTRONICS


PCB® manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load, and shock in research and development as well as industrial applications.

ENDEVCO


The Endevco® brand is known for highly reliable products for test and measurement applications, including solutions for shock, vibration, motion, pressure, and supportive instrumentation. It was acquired by PCB® in 2019.

CONNECT

CONTACT


10869 NC Highway 903
Halifax, NC 27839

SensorlineSM
+1 716-684-0001

1-866-ENDEVCO

Endevco® is a registered trademark of PCB Piezotronics of North Carolina, Inc.

© PCB Piezotronics of North Carolina, Inc. All rights reserved