Legacy Model 28959F/FV Calibrator Boot-up Issue Notice | Please view this PDF for details.
Do You Have Any Questions?Toll-free (in the US): 1-866-ENDEVCO
Fax: 1-716-684-0987
Contact Endevco We found 33 matches.... Accessories, Triaxial and 6DOF mounting block, accommodates three 7310A angular rate sensors and three 7264C, 7264D, 7264H or 726CH accelerometers
Accessories, Triaxial mounting block for 7264-2000, 7264C, 7264D, 7264G
Accelerometer, PR, 2,000 g, undamped, screw mount, 10 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 15 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 20 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 25 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 30 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 33 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 35 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 65 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 15 ft red cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 15 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 20 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 25 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 30 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 35 ft cable, 5V & 10V excitation
Accelerometer, PR, 2,000 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 15 ft blue cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 15 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 20 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 25 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 30 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 25 ft red cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 15 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 20 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 25 ft cable, 5V & 10V excitation
Accelerometer, PR, 500 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 30 ft cable, 5V & 10V excitation
500 g, undamped, screw mount, 1% transverse sensitivity, 25mV ZMO, 25 ft blue cable, 5V & 10V excitation
model 7264C series utilizes only two active arms in the bridge, while the remaining two elements are fixed, accurate resistors with a low temperature coefficient (e.g., 7264C series fixed resistors are 500 ohms ±1% each).
Calculating the shunt resistor value is straightforward. The voltag
amped 7264C accelerometers are the only accelerometer that meets the NHTSA standard for certification tests with repeatable results trusted by generations of crash test engineers. Our new multi-mode damped accelerometers have little to no resonance in the frequency range of interest and the highest
Serie 7264C entsprechen dem NHTSA-Standard für Zertifizierungstests. Die Sensoren bieten Messergebnisse mit hoher Wiederholgenauigkeit und haben sich im Messalltag der Crashtestingenieure bewährt.
Die neu entwickelten Beschleunigungssensoren mit Multimode-Dämpfung haben i
264B, 7264C, 7264H) therefore the damage to one of the bridge arms will result in substantial resistance increases that may be different for the transducer's input and output impedance measurement values.
|