Endevco
     
    • Reset
    2018 | Australia

    Numerical study of sandwich panel with a new bi-directional Load-Self-Cancelling (LSC) core under blast loading

    2018 | USA

    Evaluation of wireless bat swing speed sensors

    2018 | TBD

    Addressing spatiotemporal distortion of high-speed tissue motion in B-mode ultrasound

    2018 | Russia

    Analysis of Noise Generation by Turbulent Jets from Consideration of Their Near Acoustic Field

    2018 | South Africa

    Experimental and numerical validation of a simplified rigid torso surrogate used for investigating the fluid-structure interaction of air blast waves

    2018 | USA

    Spatial distribution of pressure resonance in compressible cavity flow

    2018 | USA

    Direct Numerical Simulation of Nozzle-Wall Pressure Fluctuations in a Mach 8 Wind Tunnel

    2018 | Canada

    Cutaneous sensitivity in unilateral trans-tibial amputees

    2018 | USA

    Nonlinear tuning curve and two-tone tests using glass beads vibrating over clamped elastic plate

    2018 | TBD

    A new method for automatic defects detection and diagnosis in rolling element bearings using Wald test

    2018 | South Korea

    Experimentally derived viscoelastic properties of human skin and muscle in vitro

    2018 | TBD

    Effect of substrates on the dynamic properties of inkjet-printed Ag thin films

    2018 | South Korea

    Dynamic properties of bolted joints in laminated composites evaluated using flexural wave propagation

    2018 | Swedan

    Compaction of Confining Materials in Pillar Blast Tests

    2018 | TBD

    A 2-DOF model-based input prediction for high shock accelerometer calibration

    2018 | TBD

    A method for high-shock accelerometer calibration comparison using a 2-DOF model

    2018 | Italy

    ExoMars Atmospheric Mars Entry and Landing Investigations and Analysis (AMELIA)

    2018 | USA

    Sustainability Study of Inherent Damping in Additively Manufactured Nickel Alloy

    2018 | USA

    Inherent Damping Sustainability Study on Additively Manufactured Nickel-Based Alloys for Critical Part

    2018 | USA

    Forced-Response Verification of the Inherent Damping in Additive Manufactured Specimens

    2018 | Norway

    Investigating Damping Performance of Laser Powder Bed Fused Components with Unique Internal Structures